Plastic waste blowing equipment
Suggestion of the continuous transport system
In late years a sharp increase of a great variety of waste becomes the social problem, and recycling of the waste advances in each industry.
Movement to use a lot of waste such as furafu or the RDF as fuel of the combustion furnace in that increased and developed *komisooki which could supply abolished plastic steadily in a combustion furnace.
Abolished plastic *komi*bigairyakuzu
Embodiment
In DEC type abolished plastic *komi*bi, 1 is comprised by the apparatus of four of the jet accelerator continuation measurement device, 4 fixed-quantity exhaust system, 3 device to beat, 2 like an upper figure.
1.Device (pin form stirrer) to beat
I prevent compaction of the abolished plastic by turning the whisk which I attached a large number of pins to on the axis and suppress the outbreak of the shelf hanging.
2.Fixed-quantity exhaust system (multiplex axis screw feeder)
I can lose the squeeze department of the storage tank and the stirring effect of the device to beat is combined and enhances a shelf hanging prevention effect of the abolished plastic more.
3.Consecutive measurement devices (lupus marrow cabbage conveyer type measurement device)
I can measure an elimination rate continually by separating a weighting capacity device from a storage tank, and, using a measurement device, a merit to be high in the detection precision is provided.
4.Jet accelerator (high-pressure gas accelerator with stirrer)
A stirring wing of the motor drive is installed in the accelerator inside.
In addition, I install a jet nozzle in the right position so that obstruction of the abolished plastic does not occur.
In addition, I install a jet nozzle in the right position so that obstruction of the abolished plastic does not occur.
The delivery results
Use
| Kind
| *kominoryoku
[kg/hr]
| Type
| Deadline
|
Blast furnace
| Film/granulation product/hard article
| MAX 1,800
| High pressure type
(test plane) | 1995
|
Examination blast furnace
| Film/granulation product
| 25-100
| High pressure type
(test plane) | 1999
|
Blast furnace
| Pellet
| 180-2,100
| High pressure type
(test plane) | 2000
|
Cement kiln
| ||||
Kiln system
| furafu
| 250-1,250
| Low pressure-style high efficiency type
(these facilities) | 2000
|
karusaina system
| Paper diaper
| 500-3,500
| Low pressure-style high efficiency type
(these facilities) | |
Gasification scorifier
| Hard article/furafu
| 5-50
| Low pressure-type general-purpose RV type
(test plane) | 2000
|
Boiler for the generation
| Pellet
| 32-320
| Low pressure-type general-purpose RV type
(test plane) | 2001
|
Dry sludge
| 51-510
| |||
Cement kiln
| Soft article
| MAX 6,000
| Jet accelerator
| 2001
|
Boiler for the generation
| Soft article
| MAX 6,000
| Low pressure-type general-purpose SC type
(these facilities) | 2002
|
Soft article
| Multi-axis screw
| 2002
| ||
Cement kiln
| Soft article/hard article/small piece of wood/paper
| 500-3,000
| Low pressure-style high efficiency type
(these facilities) | 2003
|
Cement kiln
| Soft article
| 100-1,000
| Low pressure-style high efficiency type
(these facilities) | 2003
|
Biomass boiler
| Soft article/hard article
| 700-7,000
| Low pressure-style general-purpose model
(these facilities) | 2008
|